Features
1、Maximum temperature resistance of insulation material: 250℃
2、Maximum use temperature: 250℃-300℃
3、Insulation resistance: ≥5MΩ
4、Voltage strength: 1500v/5s
Can be made into various shapes and sizes (such as round, oval, vertebral).
Can be drilled and installed, backed with adhesive or installed with bundle form.
Size max 1.2m×Xm
Size minimum 15mm×15mm
Thickness 1.5mm (thinnest 0.8mm, thickest 4.5mm)
Lead wire length: standard 130mm, beyond the above size need special order.
The back side with adhesive backing or pressure-sensitive adhesive, double-sided adhesive, can make the silicone heaters firmly stick to the surface of the object to be added. Easy to install.
According to the user's needs of voltage, power, specifications, size, product shape custom production (such as: oval, cone, etc.).
1, the use of this type of electric heating device must be noted that the continuous use of the working temperature should be less than 240 ℃, the instantaneous does not exceed 300 ℃.
2, silicone heaters electric heating device can work with the state of pressure, that is, with the auxiliary pressure plate to make it close to the heated surface. At this time, the heat conduction is good, and the power density can reach 3W/cm2 when the temperature in the working area does not exceed 240℃.
3、 Under the condition of paste installation, the allowable working temperature is less than 150℃.
4, if the air dry burning conditions, by the material temperature limit, the power density should be less than 1 W/cm2; non-continuous conditions, the power density can be 1.4 W/cm2.
5, the working voltage selection to high power - high voltage, low power - low voltage for the principle, special needs can be listed.
This product is installed and used by various methods such as pressing, double-sided adhesive, hole punching and positioning, room temperature vulcanization, etc. according to the actual site when used because of the different shapes.
