|Customized Flexible Silicone Rubber Heating Pad for Digital Control
|customized,special shape need send us the drawing.
|can be choosed whether need to add
|Lead wire material
|fiberglass or silicone rubber
|Lead wire length
|can be added
1. The silicone rubber heating pad with digital control can be customized as client's requirements.Our silicone rubber heater shape,size,power and voltage can be designed,don't have standard one;
2. The silicone heating mat can be added the 3M adhesive or addedthe spring for installing;For the any special requirements,need to tell us before inquiry.
3. The silicone rubber heating blanket can be added the temperature limited or temperature control;The temperature control we have two type: one is manual control and digital control:
*** Manual control temperature ranger: 0-80℃ or 30-150℃
*** Digital control temperature range: 0-200℃
silicone heater is a flexible heating element made of a silicone rubber material that is designed to provide uniform and efficient heat transfer in a wide range of applications. The heating element consists of a resistance wire, such as nickel-chromium or copper-nickel, that is embedded in a silicone rubber substrate, which is then bonded to a thin layer of fiberglass or other insulating material.
Silicone rubber heating pad with digital control can improve heat transfer and speed warm-ups where controlled heating is required in confined areas. Two circuit designs are available: etched foil or wire wound. Heaters with etched foil designed elements are available where the length or width dimension is less than 10"(254 mm). All other heaters where both the length and the width dimensions exceed 10" (254 mm) use the wire-wound element design. Effect of power density: gentle warming is best done with 2.5 W/in2. An excellent all-purpose unit is the 5 W/in2. Rapid warm-up and high temperature are achieved with the 10 W/in2; however, the temperature must be controlled as the safe maximum operating temperature limit of 450°F (232°C) may be exceeded.
The feature of silicone rubber heater bed as below:
1. 3M adhesive
2. The shape can be customized
3. Heating in the air, the highest temperature is 180℃
4. USB interface, 3.7V battery, thermocouple wire and thermistor can be added (PT100 NTC 10K 100K 3950%)
--- Freeze Protection
--- Low-Temperature Ovens
--- Heat Tracing Systems
--- Viscosity Control
--- Dehumidification of Motors and Control Devices
Before the inquiry,pls send us below specs:
1. Sending us the drawing or real picture;
2. Heater size,power and voltage;
3. Any special requirements of heater.