Stainless steel Toaster Oven Heating Tube Manufacturer

The structure of the electric heating oven tube is to put an electric heating wire in a stainless steel 304 tube, and the gap part is tightly filled with crystalline magnesium oxide with good thermal conductivity and insulation. The two ends of the electric heating wire are connected with the power supply through two leading rods. It has the advantages of simple structure, long life, high thermal efficiency, good mechanical strength, and can be bent into various shapes and safe use. High quality materials and strict technology are used to make electric heating tubes with excellent electrical insulation properties and high electrical strength. Products are widely used in: water tank, oil tank, boiler, oven, plating tank, load box, high temperature kiln and other industrial equipment and sauna room, electric oven and other civil electrical equipment.

Heating pipe use precautions

1, the component should be stored in the dry, if the insulation resistance is reduced to less than 1 megaohms due to long-term placement, it can be dried in the oven at about 200 ° C for several hours (or the component through low pressure for several hours), that is, the insulation resistance can be restored.

2. When carbon is found on the surface of the pipe, it must be used after removal, so as not to reduce efficiency or even burn out components.

3. When melting asphalt, paraffin and other solid oils, the voltage should be reduced, and then increased to the rated voltage after melting. To prevent the concentration of electricity to reduce the service life of the component.

(Stainless steel heating tube, can be non-standard processing according to your use environment and requirements, provide drawings, voltage, power, size)